M/s. Perma Construction Aids Pvt. Ltd.

Facebook


Cementitious Tile Joint Fillers



Perma K-Tone Filler

CEMENTITIOUS COLOURED PREMIX TILE JOINT MORTAR

DESCRIPTION
Perma K-Tone Filler (KTF) is a cementitious material in powder form. Perma K-Tone Filler only needs on site addition of water to make a mortar which is used for grouting tile joints. It is also used for grouting the joints between stones, marbles, cut stones etc. Conventional type of grouting with white or colored cements make the joint rigid and it collects dust, dirt & stains. The cements also have a high shrinkage property & tends to CREATE leakage problems.


Perma K-Tone Filler is modied to give high tensile strength, non shrink and waterproof properties. Further the product does not take stains and keeps the joints clean if cleaned properly with a detergent solution periodically.

PRIMARY USES
Perma K-Tone Filler is used for grouting tile joints. It is also used for grouting the joints between marble, granite tiles and joints of cut stones and terracotta tiles. Perma K-Tone Filler is specially selected for grouting swimming pool tile joints because of its excellent waterproof properties.

ADVANTAGES

  • Available in a range of pleasant shades.
  • Joints become crack free.
  • No staining of the joints.
  • Makes the tiled area waterproof.


DIRECTIONS FOR USE

Ensure that the tile joints are clean and dry. Blow out any dust or dirt from the tile joints. Mix Perma K-Tone Filler with clean water, in the proportion of 3.5 volumes of powder to 1 volume of water. Mix till a uniform consistency smooth paste of uniform color is obtained. Leave the paste for ten minutes in the pan for the entrapped air if any to escape and remix the paste. If the color of the paste does not match with indicated shade of the shade card remix it till the shade close to the shade card shade is obtained. Apply the paste liberally into the joints with a putty blade and even out the paste in the joint. After three to four hours, wipe out the excess Perma K-Tone Filler from the tiles with a wet sponge. Grout the tile joints with Perma K-Tone Filler after 24 hours of tile laying.


COVERAGE
Coverage of Perma K-Tone Filler depends on the size of the tile, thickness of the tile and the width of the joint. A table is available in the shade card of Perma K-Tone Filler which gives coverage for various sizes of tiles in different joint widths. Coverage is specified in Sq.ft. per pack of 500 gms.

PACKING
Perma K-Tone Filler is available in 500 gms, 1 kg Corrugated printed cartons and in 10 Kg multi-wall laminated sacks.

SHELF LIFE
Perma K-Tone Filler has a shelf life of 12 months if stored in Manufacturer’s original packing in a cool and dry place away from moisture and heat.





Looking for Product Name ?