M/s. Perma Construction Aids Pvt. Ltd.


Epoxy Primer For Concrete Surface

Epoxy Primer For Concrete Surface

Non solvented epoxy primer for concrete surfaces.


DESCRIPTION : Porosity of concrete surface, moisture and the alkalinity of the concrete surface makes it difficult for the epoxy products to bind with the concrete bases effectively. To get over these problems an effective epoxy primer is made use of. Master Wrap Primer WP-10 is a two component product based on non solvented epoxy base and epoxy hardner. Master Wrap Primer WP-10 binds the epoxy products firmly to the cementitious bases.


PRIMARY USES : To bind epoxy mortars and flooring products to the concrete base taking care of the porosity of the base and mobilising the particles of the mortars into the crevices and holes in the base.


APPLICATIONS : Perma Master Wrap Primer WP-10 is applied on a dry concrete surface which is at least 28 days old before laying epoxy materials. Master Wrap Primer WP-10 forms a part of the system with Master Wrap Saturant WS-20.



  • Master Wrap Primer WP- 10 thoroughly wets the concretes surface and mobilises the particles of the epoxy products effectively on the concrete surfaces and make it easier for epoxy products to bind with the concrete effectively.

  • Master Wrap Primer WP-10 being moisture tolerant makes the priming easy. There is no need to blow torch the surface to make them bone dry. A reasonably dry surface is good enough

  • Master Wrap Primer WP-10 is resistant to alkalis hence there is no need for the cumbersome process of acid itching the surface.


SUFACE PREPARION : Surface to be primed with Master Wrap Primer WP-10 should be free from dust, dirt, oil, grease, loose particles and excessive moisture.


COVERAGE : Perma Master Wrap Primer WP-10 covers 3-4 sq. mtr. per kg. Higher coverage may be achieved if the base is sufficiently smooth and good.


DIRECTION FOR USE : Mix the base and the rector components of Master Wrap Primer WP-10 till a uniform consistency and colored liquid is obtained. Brush apply this on the surfaces to be primed.


HEALTH AND SAFETY : Epoxy products generally cause irritation to the skin. Use of hand gloves by the workers is advised. Upon completion of day’s work all the packing material should be burnt and buried.


PACKING : Perma Master Wrap Primer WP-10 is available in 1 kg pre weighted units.


SHELF LIFE : Perma Master Wrap Primer WP-10 has a shelf life of 12 months from the date of manufacture.

Looking for Product Name ?