Perma Plast PC – 101
HIGH RANGE HYPER PLASTICISING SUPERIOR QUALITY ADMIXTURE FOR HIGH QUALITY CONCRETE BASED ON POLY CARBOXYLIC ETHERS
Perma Plast PC – 101 is based on hyper plasticising Poly Carboxylic Ethers. It may be dispensed at dosages varying between 0.4 to 3 percent by weight of cement depending upon type of concrete required.
DIRECTIONS FOR USE
Perma Plast PC – 101 should be added to the mix along with water. Addition of plasticizers to the dry mix or dry cement should be avoided. During long transits of concrete fifty percent of the recommended dosage of Perma Plast PC – 101 can be added at the batching plant and the remaining fifty percent at site just before pouring.
Field trials should be conducted to determine the optimum addition rates of Perma Plast PC – 101. However a dosage of 0.4 to 3 percent by weight of cement, depending upon type of concrete required, is recommended.
Perma Plast PC – 101 is based on hyper plasticizing Poly Carboxylic Ethers.
HEALTH AND SAFETY
Perma Plast PC – 101 is not a health hazard or fire risk. Spillages should be washed immediately to avoid possibilities of slipping.
Perma Plast PC – 101 is available in 25kg, 100kg and 200kg drum.
Perma Plast PC – 101 has a shelf life of 24 months if stored in manufacturer’s original drums. Perma Plast PC – 101 should be stored in place where temperature does not drop below + 5°C. If the product is frozen, thaw at + 30°C and agitate until completely reconstituted. Shake well before use.