HIGHLY POLYMERIZED CEMENTITIOUS COLOUR PUTTY FOR INTERIOR APPLICATION
DESCRIPTION Perma Plaster Putty Colour is a very fine quality powder putty with high polymer content and very refined fillers. This provides an ideal base for expensive and good quality paints.
PRIMARY USES Creation of smooth surface for application of paint to the walls and ceilings. It can be used on plasters, RCC or brick or block work directly.
DIRECTIONS FOR USE
Clean the surface to remove dirt, dust, laitance, oil, grease etc. Dampen concrete or the plastered surface if it is very dry or wherever required.
If the plastered surface has pores treat the surface with SBR diluted 1: 1 with water so that all the pores are primed. Subsequently then apply putty made to a flowing consistency so that all the pores get filled up then apply putty.
Mix 350 to 390 ml of clean water to 1 kg Perma Plaster Putty with the help of a mechanical mixer. Mix thoroughly and keep it for 5 to 10 minutes and then re-mix to obtain an even consistency creamy paste. Apply this paste on the plaster or brick or block work or concrete surface with spatula or putty blade. If there is a need to build up thickness it can be applied in layers taking care to see that the first layer has dried before the second layer is applied. One day light curing may be considered for optimum result. Sand paper the surface next day to perfect evenness with sand paper no. 500 and dust clean before application of paint.
PACKING Perma Plaster Putty Colour is available in 20 kg & 40 kg multi wall laminated sacks.