M/s. Perma Construction Aids Pvt. Ltd.
611/612, Nirmal Corporate Centre,, Mumbai, Maharashtra - 400080, India
Mobile : +91-9820040291
Call Us : 08042757192
Perma Universal Tile Adhesive (UTA) is a cementitious material in powder form composed of Cement, Sand and polymers which only needs on site addition of water to make a mortar which is used for fixing tiles over any cementitious surface or on existing mosaic tiles without removing them. Perma Universal Tile Adhesive is also used for fixing tiles on difficult surfaces.
PRIMARY USES : Perma Universal Tile Adhesive is mainly used for fixing glazed, ceramic, terracotta, vitreous, marble and granite tiles on Cementitious surface or on existing mosaic or ceramic floor tiles without removing them or hacking them. Perma Universal Tile Adhesive is also used for tiling on difficult vertical cementitious surfaces and in cases where the weight of the tile is more than the normal ones. Perma Universal Tile Adhesive can also be used for plaster crack repairs and paver joint grouting.
GUIDE TO APPLICATION : Ensure that the surface to be tiled is clean and free from dust, dirt, grease etc. Mix Perma Universal Tile Adhesive with clean water in the proportion of 3.5 volumes of powder to 1 volume of water. Mix till a uniform consistency smooth mortar is obtained. Leave the paste for ten minutes in the pan for the entrapped air if any to escape and remix the mortar. Apply the mortar uniformly on to the surface to be tiled as well as on the back of the tile and press the tile in position. For increasing the coverage of the material notch trowel technique can be used. While using Perma Universal Tile Adhesive wetting of the tiles or the surface to be tiled or curing is not required. However wetting of tiles help in removing the dust particles. Fill tile joints after 24 hours of tile laying.
Can be used for fixing tile over tile.
No need to break or hack the existing tiles.
No wetting of tiles required before fixing.
No wetting of surface to be tiled.
Makes the tiled area waterproof.
Holds the tile even at high temperatures.
Single component hence easy to use.
Withstands temperatures up to 200 ° C
PACKING : Perma Universal Tile Adhesive is available in 10 Kg, 20 kg, 25 Kg and 50 kg HDPE bags.